Low-Cost shipping Europe
UPS for insured priority shipping
GET EXPERT ADVISE
Get the right gear
EU Warranty
Official distributor & reseller
The AOI housings are fast becoiming a standard for the Olympus cameras.
These housings has been many years under way, as AOI first produced housings directly for Olympus.
Now they make them under their own label and with skill and grace.
The housings has everything you need, from a large port series, vaccum, LED flash trigger and a build and handling quality that will satisfy anyone.
SPEC SHEET FOR UH-OM-1
UH-OM1 GENERAL GUIDE
Description:
Underwater Housing for Olympus OM System OM-1 Camera
Housing Color: Black
Compatible Camera Model: Olympus OM System OM-1
Main Material: Housing Body: Polycarbonate
Depth Rating: 45 Meters
Lens Port System: AOI / Olympus PEN Ports System
Dimensions: 195.9mm (W) x 129.7mm (H) x 149.7mm (D)
Weight: On Land : Approx.1079 gram (Only included the Housing Body and Body Cap)
Built-in LED Flash Trigger
Compatible with
a) Manual Flash Trigger (with and without Pre-flashes Functions)
b) Olympus RC Mode
(TTL AUTO, MANUAL, FP TTL AUTO, FP MANUAL)
Water Leakage Protection: Built-in Vacuum Analyzation and Wet Detection System (VWS)
Battery Power: Built-in Rechargeable Lithium Polymer Battery (3.7V 220mAH)
Battery Charging: By USB Charger DC5V, 0.5A (not included)
Battery Operation Time: Approx. 1.5 Hours for a full charge.
Approx. 4 Days (Based on 3 Dives/Day and 1 Hour/Dive)
Standard Accessories:
Body Cap / Storage Box for PEN Mount Housing (AOI BC-02)
USB Type-C Charging Cable
LCD Monitor Hood
Spare O-Ring for Vacuum Valve Protection Cap x1pc. (AOI SRVV-01)
Vacuum Pump (AOI VP-02)
Spare Main Seal O-Ring x1pc. (AOI SOR-04)
Spare Secondary Seal Ring x1pc. (AOI SSR-03)
Silicone Grease (AOI SIGR-5)
Silica Gel (AOI SIGE-3) x3pcs.
Lanyard (AOI LYD-01)
O-ring Remover ( AOI ORR-02 )
Hot Shoe Connector (AOI HSC-02)