The Ikelite TT2 Sony TTL Fiber Optic Transmitter delivers reliable and accurate TTL strobe exposure through a fiber optic connection between compatible Ikelite underwater housings and strobes. Designed for Sony camera systems, it supports second-curtain synchronization (rear curtain sync) and allows photographers to switch between TTL and manual strobe exposure directly through the camera's flash menu. Its compact, independently sealed design replaces the Ikelite flash bulkhead or a 1/2-20 threaded accessory port plug, providing dependable fiber optic strobe triggering. It also supports high-frame-rate burst shooting when paired with compatible Ikelite strobes.
Key Features
- Reliable Sony TTL Exposure: Uses Ikelite TTL exposure algorithms for accurate underwater strobe exposure.
- Fiber Optic Connectivity: Provides optical communication between compatible Ikelite underwater housings and strobes.
- Second-Curtain Synchronization: Supports rear curtain flash synchronization.
- TTL and Manual Control: Switch between TTL and manual strobe exposure through the camera's flash menu.
- High-Speed Burst Shooting: Supports high-frame-rate continuous shooting with Ikelite 160-, 165-, DS230-, and 232-series strobes.
- Compact, Sealed Design: Replaces the housing's flash bulkhead or 1/2-20 threaded accessory port plug.
- Power-Saving Mode: Built-in power management helps extend battery life, providing at least one week of diving with average use.
Specifications
- Transmitter type: Sony TTL Fiber Optic Transmitter
- Depth rating: 60 m
- Power source: 2 × CR2032 batteries
- Battery type: Single-use or rechargeable lithium
- Battery life: At least one week of diving with average use
- TTL compatibility: Ikelite Ecko Fiber, RC165, RC232
- Legacy strobe compatibility: Compatible DS-series strobes with individual RC2 TTL Receivers
- Recommended fiber optic cable: Ikelite Coiled Cord #4501
Housing Compatibility
- Ikelite 200DL Underwater Housings for Sony: Including Sony a1, a1 II, a7 series, a7R series, a7S series, a7C II, a7C R, a9 series, FX3 and FX30.
- Ikelite 200DLM Underwater Housings: With an electrical bulkhead or 1/2-20 threaded accessory port, including Sony a6100, a6300, a6400, a6500, a6600, a6700, a7C II, a7CR, ZV-E1 and ZV-E10.
- Not designed for use with underwater housings from other manufacturers.
- Strobe and Fiber Optic Cable Compatibility
- Natively compatible strobes:
- Ikelite Ecko Fiber
- Ikelite RC165
- Ikelite RC232
Legacy Ikelite DS-series strobes
- Require an RC2 TTL Receiver (#4414) for each strobe. Compatible models include DS50 (above serial #70000), D51, DS125 (above serial #5000), DS160, DS161, DS162, DS200 (above serial #7163), DS230 and DS232.
- Compatible fiber optic cables:
- Ikelite Fiber Optic Coiled Cord #4501 (recommended)
- INON Optical D Cable, non-wireless type, L-Connector
- SEA&SEA Fiber Optic Cable (L-type) #50107
- SEA&SEA Fiber Optic Cable II #50128
- Olympus UW Fiber Optic Cable PTCB-E02
- Nauticam Optical Fiber Cable #26211 (Nauticam to INON)
- Nauticam Optical Fiber Cable #26212 (Nauticam to Sea&Sea)
Note: Most non-Ikelite strobes may only be triggered in manual mode and will not provide TTL operation. The product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON or other non-Ikelite strobes.
In the Box
- TT2 Sony TTL Transmitter
- ST3 Sony TTL Hotshoe
- Battery holder
- Silicone lubricant (1 cc tube)