Low-Cost shipping Europe
UPS for insured priority shipping
GET EXPERT ADVISE
Get the right gear
EU Warranty
Official distributor & reseller
AOI UCS-Q1RC-B Ultra Compact Strobe
Q1RC-B IS TTL COMPATIBLE.
Travel Friendly & perfect for Macro
The UCS-Q1RC-B Ultra Compact Strobe has a built-in 700-lumen continuous light with three power settings.
It can be used for macro photography, as a focus light, as well as a dive torch.
The flash also offers a modeling blink-light function, which fires a short burst of flashes to help users aim and position the strobe as desired (especially useful when using a snoot).
The strobe has a non-removable ball arm and comes with a diffuser, which provides a beam angle of 85°.
The control panel of the UCS-Q1 is kept simple with just two buttons and a single knob. The knob controls the power setting; the maximum brightness is at number 7 or the equivalent of Guide Number 22. Keeping the strobe to only manual function means that when used with an automatic compact camera, it is easy to obtain the desired the brightness. Just adjust the brightness of the strobe to match the exposure of the camera.
The strobe has a very useable beam angle of 85 degrees with the diffuser on.
The left button activates the continuous light function, which has 3 power setting. The different power settings can be obtained by cycling through the button. The highest setting is at 700 lumens which is bright enough for macro shots or even as an underwater torchlight. The continuous light also works as a focus light, allowing for quicker focusing and determining the desired strobe position.
In keeping with the concept of “My First Strobe,” the simplicity aspect extends to the ownership experience and maintenance. The buttons and knobs are clearly labelled–making it easy to control, even with gloves on. The battery compartment is secured with a screw-on cap that is sealed with two o-rings to prevent accidental flooding. Should the battery compartment flood, it does not affect the electronic compartment as the two are kept separate and preventing a hefty repair bill?
The strobe is powered by two 18650 lithium batteries, which offers up to 2000 flashes on a single charge and provides consistent power delivery, even at low levels. The strobe is equipped with power stand-by and auto power-off features to conserve power and increase the lifespan of the strobe.
Main Body Material: Polycarbonate + Glass Fiber
Waterproof Level: 60 Meters
Strobe:
Guide Number: 22
Color Temperature: 5600K (5000K with diffuser)
Beam Angles: Horizontal- 85°, Vertical- 85° (with Diffuser)
Flash Recharge Time: 0.85 Second (Full Power)
Number of Flashes: 2000 Times Full Flash with 3500mAh Li-Ion Batteries x2
Flash Sync. By Fiber Optical Cable (Multi-core Fiber Optical Cable Recommended).
Pre-flashes Sync: Auto Learning
FLASH MODES:
RC MODE: OMDS / RC FLASH (Group A, Channel 1), TTL AUTO, MANUAL, FP TTL, FP MANUAL
I-MACRO MODE: TTL AUTO, MANUAL, Snooting (Group A, Channel 1)
MANUAL MODE 6 Steps Setting: 1/64, 1/24, 1/8, 1/4, 1/2 & 1/1
MODELLING FLASH: 2 Seconds Flashing Duration / Press
FLASH TEST BUTTON: Yes
LED Light:
Maximum Output: 700 Lumens
Color Temperature: 5600K
Beam Angles: 45°
Burn Time: 160 Minutes (Max. Brightness with 3500mAh Li-Ion Batteries x2)
Battery:
18650 (5A Min) Li-Ion Rechargeable Batteries x2 (BATTERIES ARE NOT INCLUDED)
Dimensions:
125.0mm (L) X77.0mm (W) X131.0mm (H) (Ball Mount Included)
Weight:
Underwater: Approx. 70g (Batteries Included)
On Land: Approx. 520g (Batteries Included)
Accessories:
Main Seal O-Rings x2, O-Ring Remover x1,
Silicone Grease x1, Secure Line x1,
Battery Storage Case (Battery Excluded) x1