NA-Shinobi-H Housing for ATOMOS SHINOBI 5.2" 4K HDMI MONITOR with HDMI 1.4 Input
Nauticam housing for ATOMOS SHINOBI monitor
The Atomos Shinobi 4K HDMI and Shinobi SDI are fantastic monitors, that has a very bright 5.2" screen with a dynamic range of 10 stops. The monitors include a variety of exposure and focus tools to insure your shooting is correct and well exposed.
THE NAUTICAM SHINOBI UNDERWATER HOUSING
HDMI cable version
Using a monitor is fun and easy. And not only if you are a videoographer - but most certainly also as a still photographer.
Shooting macro with a monitor has never been easier.
Previously the HDMI cables were fragile and would often break.
Nauticams complete bulkhead and cabel system will ensure durability and easy mouting on your housing.
The Nauticam NA-Shinobi-S follow the strong foundation Nauticam has built around previous Atomos monitor/recorder housings. (The NA-Shinobi-S supports the Shinobi SDI monitor.) The Shinobi is easily mounted in the housing, dropping in without trays or other mounting accessories and is held in place by two rotating locking levers. The NA-Shinobi supports up to the NP-F970 size battery which provides approximately 4 hours of run time. A CR-2032 battery powers the vacuum check and leak detection system. When used with the included Vacuum Valve, the system gives real-time feedback about the watertight integrity of the housing through an easily visible multi-color LED on the top of the housing. Access to the touchscreen controls of the Shinobi are handled via a series of buttons and a selector knob beneath the screen of the housing.
The Shinobi exposure guides include a Waveform for luminance, RGB Parade for color balance, and Vector Scope for hue and saturation. These tools, especially useful for the underwater filmmaker, allow accurate and fast judging of exposure, even in the most uncooperative lighting scenarios.
Critical focus can be achieved using various peaking tools. Focus Peaking Color displays the original color image with the sharpest areas outlined in a selectable color. Focus Peaking Mono provides the same overlay but on a monochrome image. Focus Assist Outline shows only the false color outline on a black background of the sharpest areas.
What is In The Box:
25096 SDI cable in 0.75m length (pre-installed)
M25-M16 Step Down Adaptor (pre-installed)
25625 M16 Vacuum Valve II (pre-installed)
Mounting ball (pre-installed)
25058 M16 SDI Bulkhead
25060 SDI cable in 0.3m length (for connection from camera to underside of SDI Bulkhead)
90137 Housing O-ring, lubricant, O-ring remover
CR2032 Battery (for moisture alarm and vacuum system)
Allen Wrench Set
Padded Travel Case
SDI Output Accessories for Surface Monitor
The monitor comes equipped with a 0,3m water proof HDMI cable that will lead from the monitor to the housing.
A bulkhead for the housing is also included in the package.
This is an overview of accessory and spare bulkheads and cables available for the system.
*25058 M16 SDI Bulkhead
*25060 SDI cable in 0.3m length (for connection from camera to underside of SDI Bulkhead)
*25065 SDI surface monitor cable in 45m length (for connection from SDI Bulkhead to Surface Monitor on land)
25059 SDI cable extension adaptor
25061 SDI cable in 0.75m length (for connection between SDI Bulkheads)
25062 SDI cable in 5m length (for connection between SDI Bulkheads)
25063 SDI cable in 30m length (for connection between SDI Bulkheads)
25064 SDI surface monitor cable in 15m length (for connection from SDI Bulkhead to Surface Monitor on land)
* items are essential items to use with a surface monitor together with the Shinobi monitor）